£59.00Bench top universal router table for use with any 1/4" router.
Will Accept Any 1/4" Router
2 Hold Down Clamps
Horizontal Feather Board
40mm Diameter Dust Collection Outlet
A router table will convert a hand held plunging router into a stationary tool which is safer to use and quicker to set up than using freehand. Ideally suited for all 1/4" sized routers this compact router table will perform a variety of jobs such as edge moulding, trenching and tenoning.
The side frames are steel with a smooth MDF table. The insert plate, which must be drilled to suit your routers fixing points, is made from a tough plastic.
The fence arrangement is simple and effective. The three clamps supplied as standard will hold the workpiece securely down against the table and up against the cutter leaving the operator to merely feed the timber through from right to left. A perspex guards protects the operator from flying chips and a dust chute is included for connecting to an extractor. A sliding mitre fence, with a replaceable wooden face, completes the standard equipment
Suitable for use with router cutters up to 35mm diameter.
Supplied with tough plastic insert plate, adjustable fence with two replaceable wooden faces, horizontal feather board, two vertical clamps and sliding mitre fence. Learn More
£25.00No Volt Release Switch for Powertools.
For Any Powertools Up To 2200w
Integral 3 Pin Socket
Separate Start and Stop Buttons
Cover Acts As Emergency Stop
Supplied With 2m Cable and Plug
The switch can be mounted to the steel frame of any router table or mounted in any convenient location avoiding the user having to reach under the table to turn the router on and off. The switch also provides a handy emergency stop button.
There is an integral socket built into the side of the casing. Simply plug your powertool into the socket and connect the plug to your electric supply. 2 Slotted fixing points allow the switch to be used with any router table, commercial or home made. Our own router tables have predrilled mounting points for this switch.
In order to use a router with an NVR switch you need to be able to lock the router switch on for hands free operation. If your router has a trigger type switch which cannot be locked on you will need to contact the manufacturer or their distributor to obtain a fastening clip. Some routers can also be rewired to bypass the router switch and use this NVR switch instead.
Supplied with integral socket, separate start and stop buttons, 2m cable, plug and fixing bolts. For use with any power tools up to 2200watts. Learn More
Regular Price: £289.00
Special Price: £275.00DISPLAY MACHINE COLLECTION ONLY
NVR Switch Included in Package
1/2" Collet Extension Included in Package
Precision Ground Cast Iron Table
Hinge Top for Access to Router
Cast Iron Cutter Hood
Spring Loaded Work clamps
T-Slot Mitre Guide
100mm Diameter Extraction Outlet
Floor stand Included
The rigid steel floor stand provides a comfortable working height for handling large panels. The table top is hinged to the floorstand and can be raised up, using the lifting handles provided, making the router more accessible when adjustments are needed. The table aperture is 100mm diameter with insert rings provided to reduce this size when using smaller diameter cutters.
The cutter hood is also cast iron, with a 100mm diameter dust extraction outlet at the back. The two aluminium fences can be adjusted so that gap between fence and cutter is minimised, providing maximum support to the work piece. Two vertical hold downs ensure a smooth feed into the cutter. For the odd job where the whole face is being removed, a simple shim (not provided) can be added to the outfeed fence to step it out and provide support to the work piece.
The cast metal mitre fence runs in a T-slot and is particularly accurate on this model. The guide swings from 90 to 30 degrees each way with locater stops at 45 degrees and a further stop at 90 degrees for accurate end grain work.
The clamping system, used to attach the router to the table, is universal allowing any sized router from any manufacturer to be used.
Supplied with W025 NVR Switch, CE12 60mm extension collet for 1/2" routers, 4 rubber feet, mitre guide, 100mm extraction outlet and insert rings. Learn More
The BS52 benchtop shaper table is the latest
model in this range to be launched by Woodster, with a more powerful
1500w variable speed motor & alloy table top as standard the BS52
will be the perfect addition to any home workshop.
Also as standard are both 1/4 & 1/2" collets & 2 table extensions giving an overall table size of 1030 x 360mm.
The workpiece is held firm by finger pressure guides (not illustrated) & a mitre guide assists when moulding end grain
This compact machine offers you all the important features of a big
machine at an exceptional price, ideal for home woodworkers & DIY
PLEASE NOTE CARRIAGE IS EXTRA AS STATED BELOW.Learn More
£419.99Special Offer comes with free collet extension.
Transform your router into a precise mini spindle moulder, which will almost certainly transform your workshop and add another dimension to any project you undertake.
A router is already one of the most versatile machines in a workshop, but inverting it in a heavy duty, professional router table like the RPMS-R can transform it into a real workhorse, becoming a precise mini spindle moulder.
Our new router table accepts all popular routers, featuring a hinged table for easy router mounting and a heavy duty, finely ground cast iron table with integrated sliding carriage, fully adjustable left and right hand fences and hold down clamp.
The table comes complete with legstand which includes a built in NVR switch. All fences and a dust extraction port are included.
A cast iron table and two individually adjustable fences provide a strong support giving an accurate and fine finish to mouldings. When working on smaller workpieces, the fence assembly can be turned around 180?. This enables the rear of the cast iron table to be used, eliminating the need to reach over the sliding carriage
The RPMS-R features an integrated sliding carriage with a heavy duty toggle clamp, an essential feature for end grain work. The clamp ensures the work remains stable while the sliding carriage gives consistent and safe results.
PLEASE NOTE CARRIAGE IS EXTRA AS STATED BELOW. Learn More